Switch and socket combination, black. 1 bronze toggle switch, 1 socket. Glass-effect, YORK.

Modern design socket with a glass-like finish, featuring high-quality technology, manufactured by the switch manufacturer ROHDE+ROHDE, Germany.The surface is coated with scratch-resistant material. The frame and removable covers are made from high-quality synthetic glass, which is 11 times more shatter-resistant than window glass. They provide protection against light-induced color changes for "behind-glass" coatings, thanks to an integrated UV filter.The high-quality socket inserts come with built-in child protection.Installation / Contents: Installation is suitable for round EU wall boxes with a minimum depth of 45 mm. The set includes everything (except wall boxes) you need for a functioning product:Frame/CoverSocket insert/insertsInstallation materialsInstruction manual

Modern design socket with a glass-like finish, featuring high-quality technology, manufactured by the switch manufacturer ROHDE+ROHDE, Germany.The surface is coated with scratch-resistant material. The frame and removable covers are made from high-quality synthetic glass, which is 11 times more shatter-resistant than window glass. They provide protection against light-induced color changes for "behind-glass" coatings, thanks to an integrated UV filter.The high-quality socket inserts come with built-in child protection.Installation / Contents: Installation is suitable for round EU wall boxes with a minimum depth of 45 mm. The set includes everything (except wall boxes) you need for a functioning product:Frame/CoverSocket insert/insertsInstallation materialsInstruction manual

Modern design socket with a glass-like finish, featuring high-quality technology, manufactured by the switch manufacturer ROHDE+ROHDE, Germany.The surface is coated with scratch-resistant material. The frame and removable covers are made from high-quality synthetic glass, which is 11 times more shatter-resistant than window glass. They provide protection against light-induced color changes for "behind-glass" coatings, thanks to an integrated UV filter.The high-quality socket inserts come with built-in child protection.Installation / Contents: Installation is suitable for round EU wall boxes with a minimum depth of 45 mm. The set includes everything (except wall boxes) you need for a functioning product:Frame/CoverSocket insert/insertsInstallation materialsInstruction manual

Illuminated designer light switch with brass toggle lever from the YORK Collection. The minimalist white front plate with its frameless glass-effect finish creates an elegant contrast with the solid metal toggle levers in a premium brass finish. The combination of a crystal-clear surface, warm metallic tones and clean, understated lines gives the light switch an exclusive, architectural aesthetic. Combining minimalist styling with high-quality switching technology, the YORK light switch adds a refined design accent to any interior. The brass toggle levers against the white front plate create a beautifully balanced interplay between a classic material and contemporary design – ideal for sophisticated living spaces, exclusive interior schemes and modern architecture. A distinctive feature is the optional illumination of the toggle lever. A subtle point of light within the brass lever can be used as an orientation light in the dark, as an indicator light or as a permanently illuminated design feature. Particularly in hallways, bedrooms and living areas, the discreet illumination combines added convenience with a distinctive lighting effect. If illumination is not required, the LED insert can simply be omitted during installation. Another hallmark of the YORK Collection is its exceptional choice of more than 1,001 bespoke colours. Front plates for YORK toggle light switches and sockets can be individually reverse-painted in your chosen colour behind the glass-effect surface. The extensive selection includes original colours from Farrow & Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows the designer light switches to be carefully coordinated with wall colours, furniture, materials and individual interior colour schemes. The special reverse-painted finish creates exceptional colour depth and a particularly brilliant glass-like appearance. The surface is made from crystal-clear, high-end acrylic glass with an effective scratch-resistant coating. A UV filter integrated into the material also provides lasting protection against light-induced colour changes. This premium material is eleven times more resistant to breakage than conventional glass and is designed for long-lasting use. As a result, ROHDE+ROHDE designer light switches and sockets retain their premium appearance for many years. The complete YORK set includes the front plate in your chosen finish, the required switch inserts with brass toggle levers, the corresponding LED inserts and the necessary installation accessories. The combination of a white glass-effect front plate and warm brass toggle levers makes this version a distinctive design feature for contemporary, classic and timeless interiors. Advantages of Designer Toggle Switches with Brass Levers and a Glass-Effect Finish More than 1,001 bespoke colours from Farrow & Ball, Little Greene, RAL, NCS and Designers Guild Front plates individually reverse-painted by hand Brilliant glass-effect finish with a scratch-resistant surface High-quality acrylic glass, eleven times more resistant to breakage than conventional glass Integrated UV filter to protect the coloured finish Solid metal toggle levers in a premium brass finish Optional toggle lever illumination with a subtle point of light Safety & quality: 5-year guarantee Designed and made in Germany with high-quality workmanship Proven AVE switching technology from Italy, trusted in thousands of installations Ideal for exclusive interior schemes and sophisticated architecture Installing YORK Toggle Light Switches Multiple wall boxes can be arranged either horizontally or vertically and covered by a single continuous YORK front plate. For this configuration, the wall boxes must be installed at the standard spacing of 71 mm from centre to centre. A minimum wall-box depth of 45 mm is required. For secure installation, the toggle switches are fixed directly to the wall boxes using screws. Technical Specifications Function: On/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V (optional installation) Front Plate Dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm What's Included in the Complete YORK Set YORK front plate in your chosen finish Minimalist toggle lever with switch mechanism, in the required quantity LED insert for toggle lever illumination, in the required quantity Socket insert (only with the corresponding selected variant) Installation accessories (wall boxes not included) Illustrated installation instructions A Note on Bespoke Colour Options YORK front plates are available in a wide range of bespoke colours. If the colour scheme of your interior changes at a later date, there is no need to replace the entire light switch: the front plate can be replaced separately and with minimal effort, while the installed switch mechanism remains untouched in the wall. No qualified electrician is required simply to replace the front plate.

Illuminated designer light switch with a brass toggle and black glass-effect front plate, from the YORK collection by ROHDE+ROHDE. Deep black and warm brass create a distinctive combination of materials that works equally well in contemporary architecture and classic, timeless interiors. The solid metal toggle stands out beautifully against the black reverse-painted front, turning the light switch into a considered design feature within the room. Rather than allowing the switch to disappear visually into the background, this YORK version deliberately emphasises the contrast between the black surface, clear glass effect and warm brass. Its minimalist form keeps the overall appearance balanced and refined. The result is a premium light switch for interiors in which materials, colours and even the smallest architectural details are carefully coordinated. Black and brass – a distinctive combination The character of this YORK version comes primarily from the interplay between two very different materials. The deep black front creates a calm, graphic surface, while the warm metallic tone of the brass toggle provides a deliberate and elegant accent. The effect can vary considerably depending on its surroundings. In lighter interiors, the black front plate itself becomes a striking point of contrast. Against darker walls, it can blend more subtly into the architecture, allowing the brass toggle to become the principal visual feature. The switch can also be incorporated into a wider material scheme, coordinating beautifully with brass taps, lighting, furniture fittings or other metallic details throughout the interior. Black reverse painting, applied by hand To create the distinctive appearance of the YORK front plate, the visible surface is not simply painted black. Instead, the colour is applied by hand to the reverse of the crystal-clear acrylic glass in the ROHDE+ROHDE studio. The black colour is therefore viewed through the transparent front material. This gives it exceptional depth and brilliance, while creating the characteristic high-quality glass effect of the YORK collection. This construction also offers another advantage: the actual paint layer remains protected behind the transparent front and is not directly exposed during everyday use. A subtle point of light within the brass toggle The solid brass toggle can optionally be illuminated. A discreet point of light within the toggle can serve several purposes: as an orientation light in the dark, an indicator light or simply as a permanently illuminated design feature. Against the black background, the illumination creates a particularly striking effect. The small point of light stands out clearly, while the brass surface subtly reflects the light around it. As a result, the switch takes on a completely different character after dark. Illumination is entirely optional. If it is not required, the supplied 230 V LED insert can simply be omitted during installation. Durable glass effect for everyday use The transparent surface of the YORK front plate is made from high-quality crystal-clear acrylic glass. The material combines the elegant appearance of glass with considerably greater durability and is eleven times more impact-resistant than conventional glass. The surface also features effective scratch protection. A UV filter integrated into the material helps protect the black reverse-painted finish against long-term changes caused by exposure to light. The front plate has therefore been designed not only for its visual impact, but also for long-lasting everyday use as a frequently operated light switch. YORK is available in more than black Black is just one of the many design options available within the YORK collection. Front plates can be individually reverse-painted in a wide range of colours. Options include colours from Farrow Ball, Little Greene and Designers Guild, as well as RAL and NCS shades. This allows switches and sockets to be coordinated with wall colours, kitchens, furniture, fitted joinery and individual architectural colour schemes. Choosing black does not limit future options either: the visible front plate can later be replaced separately with a version in a different colour. Key features of YORK Black + Brass Deep black front plate, hand-painted on the reverse Distinctive contrast between the black surface and warm brass Solid metal toggle with a high-quality brass finish Frameless, minimalist design Exceptional colour depth created by reverse painting High-quality crystal-clear acrylic glass with scratch protection Material eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the black finish Brass toggle optionally available with a subtle point of light Illumination can be used as an orientation light, indicator or design accent 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy Front plate can be replaced separately if required YORK front plates are also available in a wide range of bespoke colours Installing YORK light switches The YORK range is designed for standard wall boxes. When combining several switches or sockets, individual wall boxes can be covered by one continuous front plate. Arrangements can be either horizontal or vertical. Where multiple wall boxes are used, the standard 71 mm centre-to-centre spacing must be maintained. Wall boxes must be at least 45 mm deep. The switch mechanisms are screwed directly into the wall boxes to ensure secure installation. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional Front plate dimensions 1 wall box: 88 × 88 mm 2 wall boxes: 88 × 159 mm 3 wall boxes: 88 × 230 mm 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, reverse-painted in black Switch mechanism with brass toggle in the required quantity LED insert for optional illumination in the required quantity Socket insert where included in the selected product configuration Required mounting materials, excluding wall boxes Illustrated installation instructions Simply change the front plate at a later date One of the advantages of the YORK system is that the visible front is separate from the installed switch mechanism. If the interior design or colour scheme changes at a later date, there is therefore no need to replace the entire light switch. The black front plate can simply be removed and replaced with a front plate in a different colour. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only.

Illuminated designer light switch with a brass toggle and an individually selected Designers Guild colour, from the YORK collection by ROHDE+ROHDE. The frameless front plate is reverse-painted to order using a colour from Designers Guild, allowing the light switch to be carefully coordinated with wall colours, fabrics, wallpapers, furniture and other elements of an individual interior scheme. The combination of a Designers Guild colour, brilliant glass effect and solid brass toggle creates an expressive interplay of colour, material and surface. The warm character of the brass complements many shades beautifully and gives the switch a refined, decorative quality. Depending on the colour selected, YORK can either blend discreetly into the interior or be deliberately used as a contrasting design feature. YORK is a designer light switch collection by ROHDE+ROHDE. The light switches and front plates are manufactured by ROHDE+ROHDE and are not products made by Designers Guild. Colours from Designers Guild are used to create the individually finished front plates. Designers Guild colours for individual interior schemes Colour plays a central role in the design of sophisticated interiors. With a YORK front plate individually finished in a Designers Guild colour, this approach to colour can be extended right down to the light switch. This is particularly appealing where Designers Guild wall colours, wallpapers, fabrics, upholstered furniture or other decorative elements are already being used within a room. The light switch can be coordinated with the existing scheme, becoming a carefully considered part of the interior rather than simply a functional necessity. The front plate does not necessarily have to blend as discreetly as possible into the wall. A deliberately selected contrasting colour can equally turn the switch into a small but distinctive architectural or decorative feature. Combining colour with brass creates further design possibilities. Rich blues, greens or violets can form a striking contrast with the warm metal, while pinks, reds, beiges and natural shades can create a softer, more harmonious overall effect when paired with brass. Brass toggle as a warm metallic accent The solid toggle with a high-quality brass finish provides a deliberate counterpoint to the coloured front plate. Its warm metallic tone stands out against the brilliant colour surface and gives the switch a distinctive material quality. Particularly when combined with intense or characteristic Designers Guild shades, an interesting balance is created: the colour defines the overall surface, while the brass toggle introduces a precise metallic accent. The switch can also be coordinated with other brass details in the room, such as lighting, taps, door handles, furniture fittings or decorative accessories. This makes YORK suitable for contemporary and expressive interiors as well as more classic or eclectic schemes. Designers Guild colour hand-applied behind the transparent front The selected colour is not applied to the visible face of the YORK front plate. Instead, the reverse of the crystal-clear acrylic glass is hand-painted using the chosen Designers Guild colour in the ROHDE+ROHDE studio. The colour is therefore viewed through the transparent front. This distinctive technique creates rich visual depth and a brilliant glass effect that differs considerably from a conventional directly painted surface. At the same time, the actual paint layer remains protected behind the transparent material and does not come into direct contact with hands or objects during everyday use. The interaction between the colour and the crystal-clear surface can alter the visual character of the original shade, giving it a distinctive and particularly refined appearance. Illuminated brass toggle The brass toggle can optionally be fitted with a subtle point of light. Depending on the electrical connection, the supplied 230 V LED insert can be used as an orientation light, indicator light or permanently illuminated design feature. Together with the coloured front plate, this creates a carefully balanced interplay of colour, brass and light. Against darker shades, the point of light stands out particularly clearly, while on lighter or softer colours it becomes a more understated part of the design. In darkness, the small point of light becomes a characteristic feature of the switch while also making it easier to locate. If illumination is not required, the 230 V LED insert can simply be omitted during installation. Crystal-clear surface with excellent durability For YORK, ROHDE+ROHDE uses high-quality crystal-clear acrylic glass with effective scratch protection. The material has been developed for everyday use and is eleven times more impact-resistant than conventional glass. A UV filter integrated into the front material also helps to provide long-term protection for the reverse-painted colour finish against changes caused by exposure to light. As the paint layer is positioned behind the transparent front, YORK combines the distinctive visual effect of reverse painting with a durable and easy-care visible surface. Colour as part of the interior design Using a Designers Guild colour allows the light switch to become an intentional part of a wider interior scheme. Particularly in rooms where colours, fabrics, wallpapers and furniture have been carefully coordinated, a light switch need not remain merely a technical element. The front plate can, for example, be selected to coordinate with the wall colour, pick up a shade found in a fabric or wallpaper, or deliberately introduce a new colour accent into the room. Combined with the brass toggle, this creates a design element that can work equally well in colourful interiors and more restrained schemes. In addition to colours from Designers Guild, the YORK collection is available in numerous other colour collections and colour systems. Advantages of YORK in a Designers Guild colour with brass Front plate individually reverse-painted using a colour from Designers Guild Light switches and front plates manufactured by ROHDE+ROHDE Particularly suitable for coordinating with wall colours, wallpapers, fabrics and sophisticated interior schemes Reverse-painted by hand in the studio of light switch manufacturer ROHDE+ROHDE Rich colour depth created by the transparent front Frameless, minimalist glass effect Solid metal toggle with a high-quality brass finish Brass toggle optionally illuminated with a subtle point of light Crystal-clear acrylic glass with effective scratch protection Eleven times more impact-resistant than conventional glass Integrated UV filter to help protect the colour finish 5-year guarantee Designed in Germany Tried-and-tested switch technology from AVE in Italy YORK also available in other individual colour collections and colour systems Installation of YORK toggle light switches YORK can be used for both individual wall boxes and combinations of several light switches and sockets. Multiple wall boxes can be arranged horizontally or vertically and covered by a single continuous front plate. For multiple configurations, the standard 71 mm centre-to-centre spacing must be maintained. The wall boxes must be at least 45 mm deep. For secure installation, the switch mechanisms are screwed directly into the wall boxes. Technical specifications Function: on/off switch and two-way switch Rated voltage: 250 V Switching capacity: 10 AX Protection rating: IP20 Plug-in LED: 230 V, optional YORK front plate dimensions For 1 wall box: 88 × 88 mm For 2 wall boxes: 88 × 159 mm For 3 wall boxes: 88 × 230 mm For 4 wall boxes: 88 × 301 mm The complete YORK set includes YORK front plate, individually reverse-painted using the selected Designers Guild colour Switch mechanism with brass toggle in the required quantity LED insert for optional toggle illumination in the required quantity Socket insert, where included in the selected product version Mounting materials, excluding wall boxes Illustrated installation instructions Change the colour scheme later – retain the existing switch mechanism The visible YORK front plate and the switch mechanism installed in the wall are separate components. If the wall colour or entire interior scheme changes at a later date, there is therefore no need to replace the complete light switch. A new front plate in another colour can be ordered separately and fitted in place of the existing front. The switch mechanism and electrical installation remain unchanged in the wall. No electrician is required when replacing the front plate only. Trademark notice YORK is a collection by ROHDE+ROHDE. The light switches, front plates and frames offered here are manufactured by ROHDE+ROHDE and are not products made by Designers Guild. In this product description, Designers Guild refers solely to the colours and shades used for the individual colour finish.