Touchscreen voorpaneel NOVA - glasoptiek
Productnummer:
21.01.05.006
Productinformatie "Touchscreen voorpaneel NOVA - glasoptiek"
Aanraakscherm NOVA - glasoptiek.
Hoogwaardige afwerking en aandacht voor detail kenmerken de exclusieve ROHDE+ROHDE frontpanelen.
Hoogwaardig, vlak touch bedieningspaneel met een discrete lichtspot per sensor. Het rechtlijnige frontpaneel is optisch vergelijkbaar met kristalglas en biedt vele voordelen: het is 11 keer breukbestendiger dan floatglas en weerstaat de ontberingen van het dagelijks leven met zijn krasbestendige gecoate oppervlak. Het is UV-stabiel en glashelder.
Omvang van de levering:
- Frontpaneel in de afwerking van uw keuze.
- Montage materiaal
- Montagehandleiding
(Gelieve technische inzetstukken (aanraaksensoren) afzonderlijk te bestellen)
Informatie over de fabrikant (informatieplichten volgens de GPSR-productveiligheidsverordening)
ROHDE+ROHDE
David-Gilly-Straße 1
14469 Potsdam, Germany
+49 331 951 362 12
https://www.rohdeundrohde.com
Passt zu:
Touch sensor insert
€ 78,01*
Touch light switch for 230V (optionally switchable to switch or push-button operation). Description:Touch-sensitive switch insert (touch switch) for installation behind ROHDE+ROHDE front panels in round standard wall boxes. The integrated relay can be switched off, turning the switch into a push-button. 5 years warranty*. 230V input and output voltage.
For all consumers such as LEDs, transformers, halogen lamps, energy-saving lamps, light bulbs etc. 230V. Max 6A. Integrated LED, continuous blue light. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W). Please refer to the instructions for further details.
Mode of operation:
A short tap switches the light on or off. The sensor reacts to approach already approx. 2 mm above the front panel. VDE certified touch sensor
ROHDE+ROHDE touch light switches meet the highest safety requirements: ROHDE+ROHDE® are supplied with VDE certified 230V touch sensors.
Change-over switching / cross-switching:
For a two-way or cross connection, the touch light switch can be connected with one or as many push-buttons as desired (as "extension switches"). Each connected push-button then functions like the light switch. As push-buttons, either this sensor switch (switched to push-button operation) or ROHDE+ROHDE touch push-button 230V art. no. 01.99.04.011 can be used.
Notes:
3-cable connection: A neutral conductor/neutral conductor is mandatory.
Only for deep wall boxes from approx. 45mm.
Fastening in the wall box with screws (no expanding clips).
One sensor can be installed individually in the centre, or two sensors next to each other per wall box. 1 touch sensor, 230V, switchable between on/off operation (integrated relay) or push-button operation. Mounting instructions
Varianten van € 78,99*